Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser
The revolutionary Ghost immobiliser shields your pride and joy from relay theft and key-longs. Your car won't start if someone doesn't know your PIN code.
It also has Transport Mode that allows you to disable the device temporarily and is perfect for vehicle transport and servicing. It is then activated by entering a PIN code again.
No Key Fobs, or Led Indicators
The Ghost 2 immobiliser offers a strong defense against modern car theft methods. Its undetectable installation and engine stop-blocking can reduce the chance of your vehicle being stolen, which can provide peace of mind and potentially even reduce insurance premiums.
It is not detectable by scanners and cannot be hacked with common methods such as key cloning or signal jamming. The device makes use of buttons on your vehicle such as those on the steering wheel, door panels and the centre console to generate an unique, customizable PIN code sequence that can be up to 20 presses in length. Only the vehicle owner is allowed to start the engine if the correct sequence or beacon or mobile application is employed. This adds an extra layer of protection against thieves.
You can also turn on an easy service mode for situations such as valet parking or maintenance that require you to temporarily disable the system. The mobile app makes it easy to do this, ensuring that your vehicle is safe while being worked on. It is easy to revert to secure mode when the work is completed and ensure that your vehicle is fully protected at all times.
The Ghost 2 is far more practical than other systems that require a fob. The app can be used as a backup key in case of emergency. This lets you drive while your security is shut off, without needing to enter a pin code.
No Radio Frequency Signals
Contrary to traditional security systems which have their own dedicated remote, the Ghost 2 immobiliser doesn't require any additional key fobs or keys and can be operated using existing buttons on the steering wheel or the centre console. It's also undetectable by thieves using RF scanning or grabbing technology, which means your car won't be able to start for it even if they get your keys.
The device uses an unique password sequence of buttons to lock the engine. This unique PIN code can be entered through the app or via the vehicle's existing buttons on the steering wheel and on the centre console. You can also lock the gearbox to ensure that your vehicle isn't able to be driven unless you have your key or enter your pin code. The device can be set to Transport mode, allowing you to drive your car without entering the pin code. This provides your vehicle with extra protection when it's being used for valet parking or service.
The Ghost 2 immobiliser was designed to be as discreet as possible as a theft deterrent. This makes it an ideal choice for those who have invested lots of money on customizing their cars or own expensive or rare cars. Many people have said that the device is an excellent way to prevent their cars from being stolen. Some have even reported stories of attempted car thefts that were foiled by it. The Ghost 2 is also very versatile. Customers report that it works both with regular keys and with the emergency button on their vehicle, giving them peace-of-mind when they're away from their vehicle.
No Radio Frequency Scanners
Secure your vehicle from hacking, key cloning and key theft with a Ghost immobiliser. The system makes use of the buttons in your vehicle, like those on your steering wheel and dashboard, to create a unique and programmable sequence of buttons that only you can identify. Your car won't begin without this sequence. This combination of an unique sequence of disarming and the absence of radio frequency signals makes the device extremely difficult to penetrate or bypass.
In contrast to Thatcham approved devices which depend on radio frequency scanning the Ghost CAN Immobiliser works silently and without any external signals to work its magic. It's a much safer option and comes with insurance-approved status when it's installed by a TASSA approved installer (we're one of them! ).
Due to the nature that the Ghost immobiliser integrates with your vehicle, it is strongly advised to have a professional installer carry out its installation. This ensures that it is fully integrated with your vehicle systems, resulting in maximum performance and a substantially less risk of failure.
Professional installation is usually supported by warranties and service to increase the value of your purchase. This is a major deterrent for would-be thieves, who are less likely to make any attempt to bypass the device because of its security features and skilled installation.
The Ghost is not just an effective deterrent to thieves, but it's also designed to be simple to use. It can be programmed to automatically re-arm a certain period of time after parking your vehicle. This means you don't have to remember your PIN code every time. It also provides the flexibility of Service/Valet Mode when you need to hand your vehicle to a service or valet parking. It can be turned on or off depending on your preference. a simple indication sequence.
No Wire Cutting
The Ghost 2 does not require cutting any wires from your car to install, ensuring the non-invasive integration of the original systems of your vehicle. It connects to your vehicle's CAN data network and is programmed with a unique PIN which prevents other people from starting your engine if they don't have a unique PIN sequence or app authorisation.
It is also unnoticeable by the specialised scanning tools that some thieves use, and it is silent as it doesn't emit radio signals like other immobilisers. It's weatherproof and sealed. so small that it can be concealed anywhere inside the vehicle, making it virtually impossible to locate.
The Ghost II also has the possibility of being put into 'transport mode,' which allows it to be used for short durations without the requirement of a personal PIN. This is a great option for situations such as lending the vehicle to a family or friend member, or in a situation of emergency. similar webpage can start your vehicle quickly and securely.
When installing the Ghost II, it's important to work in a well-lit space and wear protective gear when working with tools and electrical components. A basic set of hand tools can enable you to create precise connections, while a multimeter will help determine electrical values and ensure that your wiring is safe. Insulation tape and cable ties can be used to secure or join any exposed or cut wires that are exposed during the installation process.
It's also vital to disconnect the battery prior to attempting any wiring work on your vehicle. This will stop any airbag deployments that happen accidentally or electrical shocks from happening when the battery is accidentally disconnected while the Ghost II is still connected to the vehicle's system.
Easy to Install
The Ghost immobiliser is a distinctive next generation device that works by connecting directly to your vehicle's CAN Data Network and using an individual PIN Code to stop your vehicle from getting started. This makes it far harder to hack than conventional alarm systems or aftermarket key fobs and offers superior protection against key cloning hacking and relay attacks.
The device can be hidden in your vehicle, and it makes use of the buttons on your steering wheel and dashboard to create a unique sequence you can only recognize. This is a deterrent to thieves using a stolen car key to start it and also wards off the use of the diagnostic tool that thrives on hacking OBD.
Installation is easy and requires no cutting of wires. The unit connects to the vehicles CAN bus system via a continuous 12V supply as well as an earth connection. Basic hand tools are sufficient for installation, and a multimeter will help with pinpointing the correct wires. To shield the connections from damage insulation tape or heat shrink tubes are recommended. Cable ties can be used to keep the wiring neat.
Once it is installed, the device goes into a learning mode which will record your individual sequence of buttons or sequences to generate your unique pin code. The information is then stored in the CAN network which makes it virtually impossible for anyone else to duplicate your sequence and then start your vehicle.
Transport Mode is a feature that can be used in an emergency if you forget your PIN code, decide to sell your vehicle or the button stops working. This will turn off the Ghost System completely, but it will reactivate itself automatically when you go over 31mph for more than 15 minutes or enter your PIN Code. This is great for those who rent their cars regularly through services such as Turo or ZipCar.